Displaying Ospf Interface Information - HP ProCurve 6200yl Multicast And Routing Manual

IP Routing Features
Configuring OSPF
ProCurve# show ip ospf external-link-state advertise
OSPF External LSAs
Advertisements
------------------------------------------------------------------------
000302050a0307000a00082580000005d99f0024ffffff008000000a0000000000000000
000302050a0308000a00082580000005cea90024ffffff008000000a0000000000000000
000302050a0309000a00082580000005c3b30024ffffff008000000a0000000000000000
000302050a030a000a00082580000005b8bd0024ffffff008000000a0000000000000000
000002050a0321000a000824800009cdb9dd0024ffffff00800000010000000000000000
Figure 5-15. Example of the Output for Show IP OSPF External-Link-State Advertise
# show ip ospf interface
ProCurve
OSPF Interface Status
IP Address
--------------- -------- --------------- ------- --------- ------ ---------
10.3.18.36
10.3.53.36
Figure 5-16. Example of the Output for Show IP OSPF Interface
5-58
The advertise keyword displays the hexadecimal data in the specified LSA
packet, the actual contents of the LSAs. This can also be filtered as above by
including the link-state-id, router-id, or sequence-number options.

Displaying OSPF Interface Information

To display OSPF interface information, enter show ip ospf interface at any CLI
level:
Status Area ID
enabled 10.3.16.0
enabled 10.3.48.0
State Auth-type Cost
BDR none
BDR none
Priority
1 1
1 1