Gas Supply Requirements - CDA HVG620 Manual For Installation, Use And Maintenance

Assembly and electrical connection should be carried out by
specialised personnel.
When installing this product we recommend you seek the help of
another individual.

Gas Supply Requirements

IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS
SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED
PERSON.
• This installation must comply with the Gas Safety (installation and
use) Regulations 1984.
• This appliance is category II2H3+ and is designed for use in the
UK and Ireland. The installation must comply with the Gas Safety
(installation and use) Regulations 1984.
• The CDA Group Ltd is not legally able to provide any assistance
in the installation of gas appliances except to Gas Safe registered
installers. Any Gas Safe registered fitter requiring help must provide
their name, address and registration number. Information supplied
will be validated before help is provided.
• In the event that this appliance is not installed in accordance with
the above requirements, the appliance may be disconnected from
the mains gas supply until any faults are rectified; this is a legal
requirement.
• This appliance should be installed using 15mm copper pipe
connected via a shut-off valve in an adjacent unit. The shut-off valve
needs to be accessible in an emergency or for service purposes.
• This appliance must not be connected to a combustion gas
11