Attach Stride Sensor On Shoelaces - Polar Electro RS400 Getting Started Manual

Attach Stride Sensor on Shoelaces

1. Undo the flap and detach the fork.
2. Loosen your shoelaces and place the fork
underneath them, on top of the tongue of the
shoe. Tighten the laces.
3. Fit the front part of the sensor onto the fork and
press from the rear end. Fasten the flap.
4. Make sure the sensor does not move and is
aligned with your foot. The more secure the
sensor, the more accurately speed and distance
are measured.
ENGLISH
Prepare For Training 11