Service; Changing Batteries - Polar Electro RS400 Getting Started Manual

Polar rs400/rs800 running computer getting started guide
Hide thumbs Also See for RS400:
Table of Contents

Advertisement

ENGLISH

Service

During the two-year guarantee/warranty period, we
recommend that you service the product at an
authorized Polar Service Center only. The warranty
does not cover damage or consequential damage
caused by service not authorized by Polar Electro.
For further information, see "Limited International
Polar Guarantee".

Changing Batteries

To change the batteries of the running computer,
transmitter, and stride sensor* yourself, carefully
follow the instructions in Install Stride Sensor
Battery. All batteries are changed the same way.
For further information on changing the foot pod*
battery, see Install Foot Pod Battery.
If you would prefer Polar to replace the battery,
contact an authorized Polar Service Center. The
Service will test the sensor after replacing the
battery.
Excessive use of the backlight drains the running
computer's battery more rapidly. In cold
conditions, the low battery indicator may appear,
16
Customer Service Information
and disappear again when you return to a warmer
environment. To ensure the maximum lifespan of
the battery cover, open it only when changing
battery. When changing the battery, make sure the
sealing ring is not damaged, in which case you
should replace it with a new one. Battery kits with
sealing rings are available at well-equipped Polar
retailers and authorized Polar Service Centers. In
the USA and Canada, sealing rings are available at
authorized Polar Service Centers only.
Keep batteries away from children. If swallowed,
contact a doctor immediately. Batteries should be
properly disposed of according to local
regulations.
*Optional S1 foot pod/s3 stride sensor W.I.N.D.
required.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs800

Table of Contents