Section 3 - Configuration
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
LAN Connection
Use the drop-down menu to select Static IP if your ISP
Type:
assigned you the IP address, subnet mask, gateway,
and DNS server addresses. Select Dynamic IP (DHCP)
to automatically assign an IP address to the computers
on the LAN/private network.
Access Point IP
Enter the IP address assigned by your ISP.
Address:
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
Device Name:
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-15 User Manual
Network Settings
Static
53