Static Ip; D-Link Dap-15 User Manual - D-Link DAP-1522 Xtreme N Duo User Manual

Section 3 - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in
the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access
point will not accept the IP address if it is not in this format.
LAN Connection Use the drop-down menu to select Static IP if your ISP
Type:
assigned you the IP address, subnet mask, gateway,
and DNS server addresses. Select Dynamic IP (DHCP)
to automatically assign an IP address to the computers
on the LAN/private network.
Access Point IP Enter the IP address of the access point. The default IP
Address: address is 19.168.0.50. If you change the IP address,
once you click Apply, you will need to enter the
new IP address in your browser to get back into the
configuration utility.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
Device Name:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than one
D-Link device within the subnet.

D-Link DAP-15 User Manual

Static IP

7