Related Manuals for D-Link DAP-3711
Summary of Contents for D-Link DAP-3711
- Page 1 Quick Installation Guide 5km Long Range 802.11ac Wireless Bridge DAP-3711 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Before You Begin Hardware Overview This installation guide provides basic instructions LED Indicators for installing the DAP-3711 on your network. For additional information about how to use the access point, please see the User Manual from the D-Link support website. -
Page 4: Hardware Installation
RJ-45 connector on the cable will not fit properly into the receptacle on the access point. Configuring the Access Point To set up and manage the DAP-3711, use one Figure 2: DAP-3711 Interface of the following methods. Feature... -
Page 5: Mounting The Device
Mounting the Device on the DAP-3711. Installation Recommendations If you plan to install the DAP-3711 on a pole, orient the front of the access point (the side without the LEDs) toward the intended coverage area. The radio antennas transmit through the front of the access point but not through the reverse side (where the bracket is). - Page 6 RF Frequency Requirements This device is for outdoor use only. High power radars are allocated as primary users of the 5150 ~ 5250 MHz, 5725 ~ 5850 MHz bands. These radar stations can cause interference with and/ or damage PoE Adapter this device. This is fixed point-to-point device.
-
Page 7: Fcc Radiation Exposure Statement
Appendix - Statements FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 8 Ver. 1.00(WW)_130x183 2020/07/01...