Wireless Settings; D-Link Dap-15 User Manual - D-Link DAP-1522 Xtreme N Duo User Manual

Section 3 - Configuration
The current wireless mode is set to Access Point, it will
Wireless Mode:
create a wireless infrastructure network.
Check the box to enable the wireless function. If you do
Enable Wireless:
not want to use wireless, uncheck the box to disable all
the wireless functions.
When you are browsing for available wireless networks,
Wireless Network
Name: this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID. For security purposes, it is
highly recommended to change from the pre-configured
network name.
Operating frequency band. Choose .4GHz for visibility
80.11 Band:
to legacy devices and for longer range. Choose 5GHz for
least interference.
If you choose .4GHz band, than select one of the
80.11 Mode:
following:
Mixed 80.11n, 80.11g and 80.11b - Select if you are
using a mix of 80.11n, 11g, and 11b wireless clients.
80.11b Only - Select if you are only using 80.11b
wireless clients.
80.11g Only - Select if you are only using 80.11g
wireless clients.
80.11n Only - Select if you are only using 80.11n
wireless clients.
Mixed 80.11g and 80.11b - Select if you are using a mix of 80.11g and 11b wireless clients.
Mixed 80.11n and 80.11g - Select if you are using a mix of 80.11n and 11g wireless clients.
If you choose 5GHz band, then select either 80.11a Only, 80.11n Only, or Mixed 80.11n and 80.11a.

D-Link DAP-15 User Manual

Manual Configuration

Wireless Settings

4