D-link xstack storage iscsi san arrays (137 pages)
Summary of Contents for D-Link DAS-3 Series
Page 1
ADSL IP DSLAM Before You Begin This Quick Installation Guide gives step-by-step instructions for setting up the D-Link DAS-3 Series ADSL IP DSLAM. This Quick Installation Guide only introduces you for the main setup procedure. For more detailed information about complete installation and configuration, please refer to the User’s Manual on master CD included with your DLSAM.
Page 2
Console Cable Setup the DAS-3 Series ADSL IP DSLAM The DAS-3 Series can be installed in a standard 19-inch rack, by using the mounting brackets provided. Mount the shelf on the rack using the large screws. The procedure to connect and wire the system is as follows.
Page 7
DAS-3 Series through LCT. Connect to DAS-3 Series with RS-232 or Ethernet cable, and then write the IP into DAS-3 Series by telnet or CLI. Input the following commands sequentially: create snmp host ip 192.168.1.xxx community public, where 192.168.1.xxx is the IP of your PC and public is the SNMP community.