Ip Settings - D-Link DSM-G600 Instruction Manual

DSM-G600 User's Manual
Home > LAN
Jumbo Frames:
DHCP Client/
Static IP:
IP Address:
Subnet Mask:
Gateway Address:
DNS1/DNS2:
You may also change the LAN IP address using the D-Link Easy Search Utility. Please
refer to the appendix at the end of this manual.
D-Link Systems, Inc.
Check to allow support for jumbo frames.
Select either DHCP Client (default) if you have a DHCP server
or router on your network, or Static IP if you want to assign the
network settings manually.
Enter the IP address of the DSM-G600 here, when Static IP is
selected.
Enter the subnet mask here, when Static IP is selected.
Enter the gateway address here, when Static IP is selected. This
is normally the LAN address of your router.
DNS (Domain Name System) is an Internet service that translates
domain names into IP addresses. Enter a DNS address here. If
you are using a router in your network, you can usually enter the
router's LAN IP address as the DNS address.
Apply:
Click Apply to save the changes.
Using the Configuration Utility
28