Manual Configuration; Wireless Settings - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
Wireless The current wireless mode is set to Access Point, it
Mode:
will create a wireless infrastructure network.
Enable Check the box to enable the wireless function. If you
Wireless: do not want to use wireless, uncheck the box to disable
all the wireless functions.
Wireless When you are browsing for available wireless
Network networks, this is the name that will appear in the list
Name: (unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the pre-configured network name.
802.11 Band: Operating frequency band. Choose 2.4GHz for visibility
to legacy devices and for longer range. Choose 5GHz
for least interference.
802.11 Mode: If you choose 2.4GHz band, then select one of the
following:
Mixed 802.11n, 802.11g and 802.11b - Select if you
are using a mix of 802.11n, 11g, and 11b wireless
clients.
802.11b Only - Select if you are only using 802.11b
wireless clients.
802.11g Only - Select if you are only using 802.11g
wireless clients.
802.11n Only - Select if you are only using 802.11n wireless clients.
Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 11b wireless clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients.
If you choose 5GHz band, then select either 802.11a Only, 802.11n Only, or Mixed 802.11n and 802.11a.
D-Link DAP-15 User Manual

Manual Configuration

Wireless Settings