Disassembly; Upper Housing Removal - Epson Stylus C41 Service Manual

Stylus C41/42/43/44 series

2.2 Disassembly

The flowchart below shows step-by-step disassembly procedures. When disassembling
each unit, refer to the page number shown in the figure.
Upper housing
removal
Page 18
ASF unit Printhead unit
removal
removal
Page 20 Page 29
PS unit MAIN board
removal removal
Page 22
Page 27
Figure 2-1. Disassembling Flowchart
C A U T I O N Do not remove the Main Frame from the Lower Housing to avoid the
deformation of the Main Frame.
Therefore, you cannot remove the following parts.
T
Lower Housing
T
Main Frame
T
PF Motor
T
Pump Unit
T
Cap Unit
T
PF Roller Assy.
Disassembly and Assembly
Paper eject
roller removal
Page 23
LD unit Waste ink pad
removal removal
Page 32
Page 32
Disassembly

2.2.1 Upper housing removal

1. Move the edge guide to the right until it stops moving. Make sure the edge guide is
in the upper housing's notch position.
Figure 2-2. Position of Edge guide
Revision B
Edge guide
18