Printer Alignment; Alignment; Microboards Toolbox - MicroBoards Technology G3 User Manual

Printer Alignment

Verify the printer alignment the first time you use the Publisher. You may need to align your
printer before the printed images will be centered on your media. Changing the brand or type
of media you are using may also require small alignment adjustments.

Alignment

•
Click System Preferences in the Dock.
•
Select Print & Fax.
•
Select Print & Fax.
•
Double-click the Microboards GX Series icon.
•
Click the Printer Setup button.
•
Click the Utility button to open the

Microboards Toolbox.

•
Click
button.
•
Click the Disc Printing icon.
•
Enter the alignment changes into the
Top and Left Side boxes.
settings will change the size of the
top and left margins, respectively.
Decreasing the values will move the
image up or to the left, increasing will
adjust down or to the right.
•
Click the Apply Now button.
•
Verify the alignment by printing a full coverage image. The image should print centered on
the disc. If not, adjust the Top and Left Side alignment values according to the graphic on
the Alignment tab and repeat.
Microboards Utility
Access the Microboards Utility by selecting the System Preferences from the Dock.
Select Print & Fax. Highlight the Microboards GX Series icon and click the Utility icon.
You can also select Open Printer Utility from the Utilities menu in PrintWrite. The
Utility will allow you to access the Printer information as shown below.
10
the Open Printer Utility
These
Docked
Utility Icon