Support; Register; The G3 Disc Publisher And Printwrite - MicroBoards Technology G3 User Manual

Disc Printing
The Outer and Inner Diameters will change the
size of the area to be printed.
excessive ink buildup, these values should
never be set so that the G3 Disc Publisher is
printing off the media.
The Alignment values will move the print
image on the disc in 0.1 mm increments.
The Restore to Factory Settings button will
restore the values to the default values. The
Top and Left Side values will be changed to 0.

Support

Clicking the Support button will open the Microboards Technology Support website in your default
internet browser. This function requires an internet connection.
Supplies
Clicking the Supplies button will open the Microboards Technology website in your default internet
browser. This function requires an internet connection.
Registration
Clicking the Registration button will open your default internet browser to the Microboards Product
Registration webpage. When registering your G3 Disc Publisher, please be sure you are including
the correct serial number, which will be on the back of the G3 and on the box product label. This
function requires an internet connection.
Recycling
Clicking the Recycling button will open the Microboards Technology website in your default internet
browser to provide you with information on recycling used ink cartridges. This function requires an
internet connection.

The G3 Disc Publisher and PrintWrite

Microboards PrintWrite is required to control the Burn and Print functionality of the Microboards G3
Disc Publisher. It is able to set up publishing jobs, load the GX , burn to the loaded disc, unload the
disc, and then print the image you have selected.
PrintWrite will automatically find your G3 Disc Publisher the robotics and printer when the application
is opened. Having more than one robotic system connected to the Mac is not supported.
Please see the Microboards PrintWrite manual for more information on using PrintWrite.
12
To avoid