Table of Contents
Advertisement
4. Under category, double-click on Advanced and then click on Proxies.
5. Select Direct connection to the Internet and click on OK button.
6. Click on OK button.
3.
Q:
Web page hangs, corrupt downloads, or nothing but junk characters is being
displayed on the screen. What do I need to do?
A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control
Panel, in your Ethernet Adapter's Advanced Properties tab.)
4.
Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser.
9.5
N+ Mini Broadband Router Setup
1.
Q: Why does N+ Mini Broadband Router' s setup page shut down unexpectedly?
A: If one of the pages appears incompletely in N+ Mini Router' s setup pages, please
click on Logout item on the Main Menu before shutting it down. Don' t keep it working.
Then, close Internet browser and open it again for going back to the previous page.
2.
Q:
Why can' t my USB devices and LAN ports work properly after setting the
DHCP?
A: There are two rules over here.
Rule1: After connecting USB devices, please reboot your Router.
Rule2: Before finishing the DHCP setup, please don' t connect any computer to LAN
ports, because the conflict of having the same IP may occur and cause some
computers a lot of trouble.
※ Notice: Make sure that you always click on the Apply button after configuring
each setting. And in order to let other LAN ports work properly, please reboot
your PC.
3.
Q:
I don' t know how to configure DHCP.
A: DHCP is commonly used in the large local network. It allows you to manage and
distribute IP addresses from 2 to 254 throughout your local network via N+ Mini
Router. Without DHCP, you would have to configure each computer separately. It' s
very troublesome. Please Open Internet browser > Input 192.168.1.1 in the
http://www.sapido.com.tw
197
User Manual V1.0
Hide quick links:
Advertisement
Table of Contents
