N+ Broadband Router Setup - Sapido RB-1232 User Manual

N+ broadeband router
Hide thumbs Also See for RB-1232:
Table of Contents

Advertisement

A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control
Panel, in your Ethernet Adapter's Advanced Properties tab.)
3.
Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser.
7.5

N+ Broadband Router Setup

1.
Q: Why does N+ Broadband Router' s setup page shut down unexpectedly?
A: If one of the pages appears incompletely in N+ Broadband Router' s setup pages,
please click on Logout item on the Main Menu before shutting it down. Don' t keep it
working. Then, close Internet browser and open it again for going back to the
previous page.
2.
Q:
Why can' t my USB devices and LAN ports work properly after setting the
DHCP?
A: There are two rules over here.
Rule1: After connecting USB devices, please reboot your Router.
Rule2: Before finishing the DHCP setup, please don' t connect any computer to LAN
ports, because the conflict of having the same IP may occur and cause some
computers a lot of trouble.
※ Notice: Make sure that you always click on the Apply button after configuring
each setting. And in order to let other LAN ports work properly, please reboot
your PC.
3.
Q:
I don' t know how to configure DHCP.
A: DHCP is commonly used in the large local network. It allows you to manage and
distribute IP addresses from 2 to 254 throughout your local network via N+
Broadband Router. Without DHCP, you would have to configure each computer
separately. It' s very troublesome. Please Open Internet browser > Input
192.168.1.1 in the website blank field > Select DHCP Server under the IP Config
Menu. For more information, please refer to 3.3.2 (Router Mode) or 4.3.1 (AP Mode).
4.
Q: How do I upgrade the firmware of N+ Broadband Router?
A: Periodically, a new Flash Code is available for N+ Broadband Router on your product
supplier' s website. Ideally, you should update N+ Broadband Router' s Flash Code
http://www.sapido.com.tw
104
User' s Manual V1.0

Advertisement

Table of Contents
loading

Table of Contents