Upgrade Firmware - Sapido RB-1132 User Manual

2. New Password (Confirm)
Enter the new password again for confirming.
3. Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the
input data.
Note: 1. Only the password can be changed, the user name for administrator is admin and not to be changed.
2. If you forget administrator' s password, please reset 3.5G plus WLAN Mobile Server Router to default setting by
pressing the "Reset" button on the rear panel over 5 seconds. And the password will return to admin.
7.3.2

Upgrade Firmware

There is certain risk while upgrading firmware. Upgrading firmware is not recommended
unless the significant faulty is found. You can upgrade the firmware of N+ Mini Router on this
page. Make sure the firmware you want to use is on the local hard drive of the computer. Click
Upgrade Firmware to proceed.
1. Update Firmware
Click on Browse... button to search your local hard drive and locate the firmware to be
used for update.
2. Upload & Reset:
Click Upload to upgrade the firmware or Reset to restore to factory default Settings
Note: 1. To prevent the firmware upgrading interrupted by other wireless signals and caused failure. We
recommend using wired connection to do the upgrading.
2. Before upgrading the firmware, please remove any USB device which connected with this router.
The firmware upgrade will not remove your previous settings.
3.
http://www.sapido.com.tw
176
User Manual V1.0