Sapido RB-1132 User Manual page 36

not available, it starts to search downward for 3/2.75/2.5G signals until none existed.
Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes,
the system immediately switches to 3.5G Internet connection and will disconnect when the
original Dynamic IP recovers.
Click on Next button to go on next setting page.
4.2.3.7 WAN Access Type – PPPoE
This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol over
Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and
password.
Apply 3G or 3.5G transmission rate for the backup. In other words, once PPPoE connection
is disconnected, the system automatically connects Internet via 3.5G adapter. If 3.5G signal
36
http://www.sapido.com.tw
User Manual V1.0