Table of Contents
Advertisement
verifications so that your Web browser can read configuration pages inside your
router. Launch your Web browser. Internet Explorer Users:
1. Click on Tools > Internet Options > Connections tab.
2. Select never dial a connection, click on Apply button, and then click on OK
button.
3. Click on Tools and then click on Internet Options.
4. Click on Connections and then click on LAN Settings.
5. Make sure none of the check boxes are selected and click on OK button.
6. Click on OK button.
Netscape Navigator Users:
1. Click on Edit > Preferences > double-click Advanced in the Category window.
2. Click on Proxies > select Direct connection to the Internet > click on OK button.
3. Click on Edit again and then click on Preferences.
4. Under category, double-click on Advanced and then click on Proxies.
5. Select Direct connection to the Internet and click on OK button.
6. Click on OK button.
3.
Q:
Web page hangs, corrupt downloads, or nothing but junk characters is being
displayed on the screen. What do I need to do?
A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control
Panel, in your Ethernet Adapter's Advanced Properties tab.)
4.
Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser.
5.5
ADSL2/2+ Broadband Router Setup
1.
Q: Why does ADSL2/2+ Broadband Router's setup page shut down unexpectedly?
A: If one of the pages appears incompletely in ADSL2/2+ Broadband Router's setup
pages, please click on Logout item on the Main Menu before shutting it down. Don't
keep it working. Then, close Internet browser and open it again for going back to the
previous page.
2.
Q:
I don't know how to configure DHCP.
http://www.sapido.com.tw/
43
User Manual v1.0.0
Advertisement
Table of Contents
