Chapter 4 Basic Setup; Router Mode; Switch To Router Mode; Administrator Setup Instruction - Sapido RB-1132 User Manual

Chapter 4
4.1

Router Mode

Under Router Mode, the 3.5G plus 11n Mobile Router provides a Router/AP function. User
can get IP address assigned by ISP wired or wireless. It also supports NAT and DHCP
functions that enable multiple computers to share Internet connection at the same time.
4.1.1

Switch to Router Mode

Switch to Router mode and plug in power.
Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds
between power-off / power-on condition.
2. Switching the mode while power is on will make the router crush, and cause the hardware damage and
information lost.
4.1.2

Administrator Setup Instruction

Make sure switch the mode to Router Mode, then open a Microsoft Internet Explorer, Mozilla
Firefox or Apple Safari browser, and enter
blank.
Note: If the homepage doesn' t appear, please check if the TCP/IP configuration is obtaining IP address
automatically or not. If you don' t know how to do it, please refer to "1.5 Get your IP Automatically &
Manually".
http://www.sapido.com.tw
Basic Setup
http://192.168.1.1
28
(Default Gateway) in browser' s
User Manual V1.0