4.2.4
Basic Setup Complete
The Basic Setup has been completed successfully when you see this screen.
The system will reboot automatically and go to the product' s diagram homepage. You may
connect to Internet via wired or wireless at this moment according to above settings.
4.3
AP Mode
Under AP Mode, the N+ Mini Broadband Router supports 1 LAN port as Bridge, and user can
connect to this Router via LAN port and provide the lower level wired or wireless internet
connections. NAT function is disabled under AP mode. The N+ Mini Broadband Router
connects the upper level device only through the Ethernet port and gets its assigned IP
address. If not, the N+ Mini Broadband Router will use the default IP or assigned by the user.
4.3.1
Switch to AP Mode
Switch to AP mode and plug in power.
http://www.sapido.com.tw
43
User Manual V1.0