Videocon 325LDF User Manual page 4

Warnings and Safety Precautions
Do not allow anything to rest upon or roll over the power cord – and do not place the
TV where the power cord is subject to damage or left trailing in a position that could
cause someone to trip leading to injury and/ or damage to the product.
Remove the AC plug from the wall outlet – when the TV is not in use for a prolonged
period of time and before going to bed. Ensure that the mains plug is easily accessible
at all times. The power switch on this model does not fully disconnect the TV from the
mains supply – unplug to fully switch off and save electricity.
Unplug the TV in the event of a thunderstorm. Both the mains and the aerial should be
disconnected under these conditions.
Unplug the TV in case of abnormal operation – smoke, odd sounds or smells.
The TV is designed for operation on a 100 – 240V (50Hz/ 60Hz) AC power source.
Aerial Information – connect the antenna cable from your antennal/ cable socket or
the (room/ roof) antenna to the ANT IN terminal on the back of the TV to be able to
receive both Digital and Analogue broadcast transmissions. For proper operation/
performance we recommend you use an antenna cable with a ferrite filter at both
ends.
Cautions regarding use in high and low temperatures – when the unit is used in low
temperature conditions the picture may leave trails or appear slightly delayed. This is
not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location – as previously discussed – do not leave
in direct sunlight or near a heater as this may cause the cabinet to deform and the LCD
panel to malfunction.
NO WARRANTY CLAIMS ARE ACCEPTED FOR DAMAGE CAUSED BY UNSUITABLE USE
This TV product is designed to receive and display video and audio signals and for use
as a PC monitor.
ANY OTHER USE IS PROHIBITED____________________________________________
Maintenance & Notes
Cleaning – Unplug the AC cord from the AC outlet before cleaning the product. Use a
soft, non abrasive cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners. If required slightly dampen the cloth with a drop of water – to aid in removing
stubborn marks on the cabinet. For the screen we recommend the use of a specialist
LCD screen cleaner which can be purchased from your local electrical dealer.
Don't display a still image on the screen for too long a period as this can cause an after
?
image to remain on screen.
Despite the high quality of the television, random disturbances or interference may
cause occasional malfunctioning. In this case the correct function of the TV can be
restored by switching off the TV using the power button, removing the mains plug, then
switching on the unit as soon as the LED light disappears.
4