Videocon 325LDF User Manual page 22

ATV MENU LIST -
ATV MENU Child Lock and Hotel Mode Notes.
For any Child Lock/ Hotel Mode parameters to function – the Child Lock ENABLE and Hotel Mode ENABLE (ON/ OFF)
option must be ON. Channel Lock/ Source Lock will only function if these ENABLE commands are ON
You can select as many individual channels/ sources to lock out – simply select each channel/ source and select
Channel/ Source LOCK – ON
Force Position in Hotel Mode is only applicable to a single source/ channel
Change Password
Child Lock Enable
Channel Number
Channel Lock
Child Lock
The password is
"000000" by default
Source
Source Lock
Change Password
Hotel Mode Enable
Force Pos
Hotel Mode
The password is
"000000" by default
Force Video
Search Disable
Max Volume
(Option Menu Continued) Child Lock/ Hotel Mode
This feature is used to change the default password (000000) to any user defined
password – please remember this password/ keep a written note in a safe place.
On
Off
0 - 199
On
Off
TV
SCART1
SCART2
S-Video
YPbPr
VGA
HDMI1
HDMI2 HDMI2
HDMI3
DTV
On
Off
This feature is used to change the default password (000000) to any user defined
Password – please remember this password/ keep a written note in a safe place.
On
Off
0-199
TV
AV
SCART1
SCART2
S-Video
YPbPr
VGA
HDMI1
HDMI2
HDMI3
DTV
On
Off
0 – 100
Menu Operation
By using this parameter user can Enable or Disable the
Child Lock either by selecting On or Off.
This parameter is used to lock specific channels when
Child Lock Enable and Channel Lock is On.
By using this parameter user can Enable or Disable the
Channel Lock either by selecting On or Off.
This parameter used to lock any input source's when
Child Lock Enable and Source Lock is On.
By using this parameter user can lock any source by
selecting On or Off.
By using this parameter user can Enable or Disable the Child Lock
either by selecting On or Off.
This parameter is used to set the channel / program number on
which set goes forcefully when switched on from standby or mains
supply when Hotel Mode Enable is 'On' & Force Video is set to TV.
This parameter is used to set the source that is forcefully selected
when TV is switched on from standby or mains power supply when
Hotel Mode Enable is 'On'.
This parameter is used to lock the SEARCH (tuning) menu when
Hotel Mode Enable is 'On'.
When Hotel Mode Enable is 'On', user can set a maximum volume
limit .A viewer can increase the volume up to this level only and no
higher. Adjust Max Volume parameter to set limit.
22