Basic Connection And Switching The Tv On - Videocon 325LDF User Manual

5.

Basic Connection and Switching the TV On

Basic TV Connection and Switching On/ Off
1. Connect your aerial lead into the ANT IN socket
on the rear of the TV – see fig 2.
2. Connect the mains lead (supplied) into the TV
and plug into an appropriate household socket.
Use AC 100 ~ 240V power outlet for the TV
power supply. The apparatus must be connected
to a mains outlet with a protected earthing
connection - see fig 2.
3. The red standby light on the front of the TV will
illuminate.
4. Point the remote control at the front of the TV
set and press the POWER key (A) fig 1. – the blue
power light illuminates on the front of the TV –
(replacing the red standby light) and the unit
switches on. You can also press the standby key
on the side of the TV to turn on the unit from
standby – see fig 2.
TV Rear
2
I
Place the TV close to the AC outlet,
and keep the power plug within reach.
TV Front
fig 2
1
3
4
KEY CONTROLS
A – POWER KEY
B – DTV MENU
C – ARROW KEYS
D – SOURCE KEY
E – ENTER or OK KEY
Standby Mode
Your TV can be placed into standby mode in
order to reduce power consumption – this is
useful when you wish to interrupt viewing
temporarily.
• Press the POWER key (A) on the remote
control or the standby key on the TV set.
• The screen is turned off and a red standby
indicator light replaces the blue power light
on the front of the TV.
• To switch the TV back on , simply press the
POWER key (A) on the remote control or
Standby on the TV set.
• Once in Standby - to fully switch off the TV
remove the AC plug from the power outlet
– when the TV is not in use for a prolonged
period of time and before going to bed.
• Ensure that the mains plug is easily
4
accessible at all times. The power control on
this model does not fully disconnect the TV
from the mains supply – unplug to fully
switch off. Do not leave on standby or
switched on when you leave the house!
A
o
C E
D
fig 1
B
10