Video Menu - Videocon 325LDF User Manual

ATV MENU LIST - For Main Menu – (Press ATV MENU Key)
User
Dynamic
Video mode Standard
Mild
Game
Cool
Color Temp
Warm
Noise On
Reduction Off
Flesh Tone
Green Tone
Blue Tone
Advance
Cinema
mode
Audio mode
Balance
Treble Treble
Bass
AVL
(Auto Volume Level)
Program 0,1,...,199
AUTO
Color System PAL
SECAM
System BG/I/DK/L/L'
OTHERS, AUSTRIA, BELGIUM, INDIA,
CROATIA, CZECH, DENMARK, FINLAND,
FRANCE, GERMANY, GREECE,
HUNGARY, ITLAY, LUXEMBOURG,
Country
NETHERLAND, NORWAY, POLAND,
PORTUGAL, SLOVENIA, SPAIN,
SWEDEN, SWITZERLAND, TURKEY,
ENGLAND, RUSSIA, SAUDI ARABIA
Auto Search This is Auto Searching Mode that will tune all channels available automatically
Manual Search This parameter is used to tune in channels manually in case new channel is broadcast not already stored in Auto Search.
Fine This parameters allow you to fine tune channel manually in case of weak signal.
Program Edit 0,1,2,...,99,199
Favourite Program 0,1,2,...,7
0 to 9
Program Label A to Z
+, -
This menu is for selecting the pre-set picture settings. Pre programmed settings are available as
Contrast
well as the user settings also available in addition you can also use PICTURE button on remote to
Brightness
select various picture settings. In User mode you can alter colour, contrast, brightness etc to your
Colour
own personal preference.
Tint
Sharpness
NOTE: TINT is available only for NTSC. This function is to adjust tint of picture for NTSC signal.
Colour Temperature adjusts the colour temperature of the picture to , Warm (reddish) or Cool (bluish).
Noise reduction parameter is used for reducing the noise level present in video.
Mode1
Mode2
Mode3
On
Off
User
Surround
Flat
User
Music
Movie
Sports
-50 ... 0 ... +50 By using balance parameter user can adjust balance for sound output.
0,1,2,...50,...100 0,1,2,...50,...100 This parameter is used to adjust higher frequency level in sound output. This parameter is used to adjust higher frequency level in sound output.
0,1,2,...50,...100 This parameter is used to adjust the low frequency level of sound output.
This parameter is used for automatic volume cont.
On
If it is ON then sound volume level is adjusted automatically.
Off
In case of distorted audio due to high audio modulation index, turn Auto Volume Control "On"
This parameter is used for sorting of program position.
Copy, Delete, Skip, Move
Select the matching colour key to select the edit option.
Press [Enter] to confirm.
Favourite program parameter is used for arranging the favourite program. Press [FAV] key
repeatedly on the Remote to access all favourite programs stored, one after another.
Program Label is used to assign a label to a program channel – e.g. BBC 1.
Press the ARROW keys on the remote control to move the cursor or change the letters.
Once finished press the [ATV MENU] key to confirm your choice.

VIDEO MENU

AUDIO MENU
This menu is for selecting the pre-set Audio setting.
Pre programmed settings are available as well as the user setting
In addition you can also use SOUND button on remote to select preset
sound settings
SEARCH MENU
These parameters indicate current program number.
This setting is necessary if picture is not reproduced correctly. Auto is the best
setting, however select PAL for UK TV signals.
This setting is necessary if sound is not reproduced correctly. I for the UK
Select the country as per your requirement.
By selecting Country, TV set will automatically adjust colour and sound system
corresponding to that country automatically
Menu Operation
These parameters are used to increase
corresponding Red, Green or Blue colour of
picture.
Cinema Mode is algorithm for auto detect and
Cinema mode enable. User can enable or
disable Cinema mode .
20