Mdc - Toshiba QOSMIO F20 Maintenance Manual

4.5 MDC

4.5 MDC
Removing the MDC
The following describes the procedure for removing the MDC (See Figure 4-8).
1. Remove the following screws fixing the MDC and pull the MDC straight up from the
connector CN3010 on the system board.
?
2. Turn over the MDC and remove the Modem cable from the MDC.
Modem cable
Installing the MDC
The following describes the procedure for installing the MDC (See Figure 4-8).
1. Connect the Modem cable to the MDC.
2. Connect the MDC to the connector CN3010 on the system board.
3. Secure the MDC with the following screws .
?
QOSMIO F20 Maintenance Manual (960-526)
M2? 4B S-THIN HEAD
Figure 4-8 Removing the MDC
M2? 4B S-THIN HEAD
4 Replacement Procedures
x2
M2? 4B S-THIN HEAD
MDC
CN3010
x2
[CONFIDENTIAL] 4-17