4.2 Battery pack/PC card/Bridge Media
4.2.3 Bridge Media (SD Card / Memory Stick / xDPicture Card/Multi Media
Card)
Removing the Bridge media
The following describes the procedure for removing the bridge media (See Figure 4-3).
CAUTION: Insert or remove the Bridge Media in accordance with any instructions in the
each Bridge Media manual or the manuals of the computer system you are
using.
1. Push a Bridge media. It will pop out partly when you release, so pull out the card.
Bridge media
Installing the Bridge media
The following describes the procedure for inserting the bridge media (See Figure 4-3).
1. Insert a bridge media and press it until it is securely connected.
QOSMIO F20 Maintenance Manual (960-526)
Figure 4-3 Removing the bridge media
4 Replacement Procedures
[CONFIDENTIAL]
4-11