Fluorescent Lamp - Toshiba QOSMIO F20 Maintenance Manual

4.24 Fluorescent lamp

4
4.24 Fluorescent lamp
This system uses the following LCD module.
Type
15.4 inch (W-XGA)
15.4 inch (W-XGA)
NOTE: - When working with a LCD module, always use a flat, grounded table.
- Handle the backlight unit in the environment without dust, such as on the clean
bench. Keep the worktable free from any screws or other material that may
scratch the LCD surface.
- Use an anti-static or protective sheet.
- When replacing the FL unit, cover with a finger protector or similar to prevent
dirtying or scratching the LCD panel.
- Take care when handling the lamp. Excessive force may break the lamp.
- Ensure always that the power of the LCD module is turned off before
connecting or disconnecting cables and connectors.
QOSMIO F20 Maintenance Manual (960-526)
lamps Part No.
2
G33C0002A110
1
G33C0002S110
1
G33C0002T110
4 Replacement Procedures
Supplier Section
Samsung 4.24.1
Samsung 4.24.2
Chemei 4.24.3
[CONFIDENTIAL] 4-69