4.11 UA board
4.11
UA board
Removing the UA board
The following describes the procedure for removing the UA board (See Figure 4-22).
1. Take out the UA board cable from the guide and disconnect it from the connector
CN4622 on the UA board.
2. Take out the TV tuner cable from the guide and disconnect it from the connector
CN9550 on the UA board.
3. Remove the following screws and UA board from the slot.
? M2.5? 6S TAPPING
UA board cable
QOSMIO F20 Maintenance Manual (960-526)
UA board
TV tuner cable
Figure 4-22
Removing the UA board
4 Replacement Procedures
x 2
M2.5? 6S TAPPING
CN4622
CN9550
[CONFIDENTIAL]
4-33