Table of Contents
Advertisement
6-3 Extended Menu
6-3-1 Items in the Extended Menu
The extended menu contains the
following items.
Menu items in the 100s, relating to the control panels
Item number
Item name
101
SELECTION FOR
SEARCH DIAL
ENABLE
104
AUDIO MUTING
TIME
105
REFERENCE
SYSTEM ALARM
106
CAPSTAN LOCK
In the "Settings" column of the table,
the factory default settings are
indicated by an enclosing box.
Settings
Select how the unit enters the search mode.
DIAL : Turning the jog or shuttle dial switches to
search mode at all times except during recording/
editing.
KEY: The search button must be pressed to switch
to search mode.
Select the length of time for which audio muting
occurs when the unit switches to playback either
from stopped or from still playback in the search
mode (for Betacam or Betacam SP playback only).
OFF : Set the audio muting time to zero (i.e. no
muting).
0.1S... 1.0S: Set the audio muting time from 0.1
seconds to 1.0 second, in 0.1-second increments.
Select whether or not to display a warning when the
video/audio reference signal selected by the OUT
REF in the submenu, is not supplied or is out of
phase with the input video signal.
OFF : No warning.
ON: Flash the STOP button as a warning.
Select the capstan servo lock mode.
SW : The capstan servo lock mode is determined
by the CAPSTAN in the submenu.
2F: The capstan servo locks every two fields
regardless of the setting of the CAPSTAN in the
submenu.
4F: The capstan servo locks every four fields
regardless of the setting of the CAPSTAN in the
submenu.
8F (For 625 mode only): The capstan servo locks
every eight fields regardless of the setting of the
CAPSTAN in the submenu.
6-11
Setup Menu
Advertisement
Table of Contents
