Table of Contents
Advertisement
Item number
Item name
005
DISPLAY
INFORMATION
SELECT
006
LOCAL FUNCTION
ENABLE
007
TAPE TIMER
DISPLAY
008
MONITORING
SELECTION FOR
VTR-TO-VTR EDIT
Settings
Determines the kind of character information which
is output from the VIDEO OUTPUT 2(SUPER)
connector when the SUPER in the submenu is set
to ALL/CAPSTALL.
T&STA : Time data display information and the
unit's status.
T&UB: Time data display information and the user
bits.
T&CTL: Time data display information and CTL.
T&T: Time data display information and time code
(LTC or VITC) only.
TIME: Time data display information
CHAR: User-specified text data
If there is an overlap between the setting of this
item and the setting of the CTL/LTC/U-BIT button, it
is automatically avoided. For example, if CTL is
selected by the CTL/TC/U-BIT button and this menu
item setting is T&CTL, then CTL and LTC are
output.
Determines which tape transport control buttons on
the control panel are enabled when this unit is
controlled from external equipment.
DIS: All buttons and switches are disabled.
ST&EJ: Only the STOP button and EJECT button
are enabled.
ENA : All buttons and switches except the
RECORDER button and PLAYER/DMC button are
enabled.
Determines whether to display the CTL count in
12-hour mode or 24-hour mode.
+ –12H : 12-hour mode
24H: 24-hour mode
For editing with two DNW-A25WS/A25WSP units,
determines whether the recorder unit is forced into
E-E mode when the recorder unit's PLAYER/DMC
button is pressed to view the player unit's playback
signals on the LCD monitor on the recorder unit.
MANU : Do not force the recorder unit into E-E
mode.
AUTO: Force the recorder unit into E-E mode.
6-3
Setup Menu
Advertisement
Table of Contents
