Connection - Sony DNW-A25WS Operation Manual

2-1 Power Preparations

2-2 Connection

The figure below shows how to
connect two DNW-A25WS/A25WSP
units for editing.
Recorder unit
REF. VIDEO 75Ω termination
switch: ON
REF. VIDEO IN
a) 9-pin remote control cable (not supplied)
b) 75 Ω coaxial cable with BNC plugs (not supplied)
c) To input a reference video signal, connect a 75 Ω coaxial cable with BNC plugs (not
supplied) and set the REF. VIDEO 75Ω termination switches as shown in the figure.
2-6
Preparations
Reference video signal
a)
REMOTE
SDI IN
REF. VIDEO IN
c)
Push cables a) and b) in the cable clamps.
REF. VIDEO 75Ω termination
c)
switch: OFF
SDI OUT 1
b)
Player unit
REMOTE