Operating - Fagor “TOUCH CONTROL” Instruction Manual

Sensors
The vitro-ceramic cooking surface is fitted with sensors that are touch-
sensitive and also react to the presence of a reflective object.
The hotplate are operated by touching the corresponding sensors with your
fingers.
Take care to touch only one sensor at a time, otherwise they will not react to
the touch.
Keep the sensors clean and do not place objects on them. The sensors may
misinterpret dirt or objects placed on them as finger contacts.
Setting up
While the cooking surface is inoperative, the indicators for all sensors are
switched off.
Starting up
Touch the ON/OFF sensor
up. If no power is selected within five seconds, the hotplate will automatically
switch off and must be switched on again.
Power selection-/+ with horizontal and vertical
(non-compact) control sensors
Each has - / + power sensors. Touching these allows the power to be set in
the range 1 to 9.
To alter the power while the hotplate is on, touch - / + sensors to obtain the
required power level.

OPERATING

for 3 seconds. The power 0 displays will light
63