Fagor “TOUCH CONTROL” Instruction Manual page 18

Touch control vitroceramic hobs
Table of Contents

Advertisement

Hotplate blocking function
The blocking of the hotplates prevents accidental changes while they are
operating. The initial selections are maintained and the indicators remain
active. The hotplates should be blocked to prevent children from operating
them or to prevent the effects of accidental contact with containers or tools.
Press the blocking sensor until its pilot light comes
Unblocking
Touch the blocking sensor until its pilot light switches off.
Double hotplate
The hob sources that have double heat source when acting over the
corresponding sensors to said heat source only work with their small circuit
To operate the outer part, touch the double hotplate sensor until its pilot light
comes on, switch off by touching the sensor
Focus hotplate
The hobs, which have the source of the heat source when acting over the
corresponding sensors of each heat source, only work with their circular
circuit. To swicth on the outer part as well, touch the source hotplate
sensor 0 until its control point switches on.
To swicth off the focus hotplate, touch the focus hotplate
the control point switches off.
Paella Hotplate
The hobs, which have a paella heat source, on acting over the corresponding
sensors to said heat source, only work with little resistance. If you wish the
centre ring to come on as well, touch the double ring sensor
sensor's control point lights up. And to use the ring to heat a paella pan,
touch the sensor
To switch off the two functions just touch the corresponding sensors again
and
.
OPERATING
.
65
on.
until the pilot light switches off.
sensor 0 until
.
so that the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents