Processor Unit - Furuno CSH-8L Installation Manual

2. WIRING
2.3.4 How to unplug the XH connector
If making a wrong connection of XH connector, use XH connector remover to unplug the XH
connector.
2.4

Processor Unit

2.4.1 Wiring with transceiver unit
Attach a 38P connector to the end of the cable connected to the processor unit. Plug in this
connector to CN-A1 on the MAIN Board.
Marking
Qty: 1 to 4
Color: Black or Red
Construction of cable between processor and transceiver units
Fabricating cable between processor and transceiver units
Remove the anticorrosive sheath, armor and vinyl sheath as shown below.
200
Shield
Vinyl sheath
Fabrication of cable between processor and transceiver units
2-8
Pull board slightly.
XH connector
XH connector remover
Insulators
(5 colors)
45
40
Anti
corrosive
Armor
sheath
Connector remover
Insulation tape
Core
Fold back shield
onto armor.
3.5
Core
Tape
Braided shield
Sheath
Armor
Anti-corrosive
sheath