Furuno CSH-8L Installation Manual page 17

11. Fasten the hull unit to the retraction tank.
12. Fix anti-vibration stays to the retraction tank.
Anti-vibration stays should be fixed to directions of ship's bow – stern and port – starboard.
M20
M20 Spring washer
M20 Flat washer
Gasket
M20
Flat washer
M20x80
Fastening the hull unit to the retraction tank
Fixing anti-vibration stays to retraction tank
Raise/lower drive assy
45
Orient the hull unit as shown.
This will reduce shock and
vibration, caused by ship's
pitching and rolling, at the
raise/lower drive assy.
Anti-vibration
stay
1. MOUNTING
BOW
1-9