Making An Intercom Call - AT&T Syn248 SB35020 User Manual

Syn248 SB35020/SB35025 Deskset User's Guide

Making an Intercom Call

To make an internal (extension-to-extension) call, you must use the intercom line. You
can access the intercom line by pressing the Intercom key. By default, key 10 is an
Intercom key, as shown in Figure 10, but your system administrator can configure
additional Intercom keys to give you more intercom lines.
Your system administrator can program your Deskset to use a specific external
line or intercom line whenever it goes off hook. To override this automatic
behavior, press a Line key or Intercom key for the desired line after you go off
hook.
To make an intercom call:
1. With the Deskset in Idle mode, go off hook by lifting the handset, pressing
(SPEAKER), or by some other method.
2. Press the Intercom key, then dial the extension number.
Instead of dialing after pressing the Intercom key, you can press
the desired extension number, then press
When your intercom call is answered, the active call screen appears.
Making Calls
Figure 10. Intercom Key
(SELECT) to dial the number.
25
Back to Contents
, highlight
ExtList