Intercom - AT&T EL52219 Quick Start Manual

Intercom

Make and answer an intercom call
You can make an intercom call between two handsets, or a
handset and a cordless headset/speakerphone (sold separately).
1. Press INT on your handset in idle mode.
If you have two handsets and no other registered devices,
X
your originating handset screen shows Calling HS X. The
other handset rings and its screen shows HS X is calling.
X If you have more than two handsets and/or cordless
headset(s)/speakerphone(s), your originating handset
screen shows Intercom to:. Use the dialing keys to select the
destination device (1-5; depends on registration sequence).
The destination device rings. If it is a handset, its screen
shows HS X is calling.
2. To answer the intercom call, press any dialing key (0-9, or ),
PHONE/
FLASH
Both handset screens now show Intercom.
3. To end an intercom call, press
telephone base or charger.
NOTES:
X
Before the intercom call is answered, you can cancel it by pressing
your originating handset.
X
For cordless headsets and speakerphones, refer to the corresponding user's manual on how
to answer and end an intercom call.
, /SPEAKER or INT on the other handset.
OFF/ or place the handset back in the
CANCEL
17
Intercom to:
ECO
10:30
PM
Calling HS X
ECO
10:30
PM
Intercom
ECO
10:30
PM
/CANCEL or INT on
OFF
11/20
11/20
11/20