Specifications - Dynacord PowerMate3 Owner's Manual

3
P M
OWER ATE

7 Specifications

Property
Order No.
Channels (Mono + Stereo)
Microphone Inputs (XLR)
Auxiliarys (MON, FX, AUX)
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66 Ohms
into 4 Ohms
into 8 Ohms
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66 Ohms
into 4 Ohms
into 8 Ohms
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66 Ohms
into 4 Ohms
into 8 Ohms
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel
into 4 Ohms
into 8 Ohms
Maximum Output Voltage, of power amplifier, 1 kHz, no load
THD, at 1 kHz, MBW = 80 kHz
MIC input to Master A L/R outputs, +16 dBu, typical
POWER AMP INPUTS to Speaker L/R outputs
DIM 30, power amplifier, 3.15 kHz, 15 kHz
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
Frequency Response, -3 dB, ref. 1 kHz
Any input to any Mixer output
Any input to Speaker L/R output
Crosstalk, 1 kHz
Amplifier L/R
Channel to Channel
Mute- and Standby-Switch attenuation
Fader and FX/AUX/MON-Send attenuation
CMRR, MIC input, 1 kHz
Input Sensitivity, all level controls in max. position
MIC
LINE (Mono)
LINE (Stereo)
CD (Stereo)
POWER AMP INPUTS
Maximum Level, mixing desk
MIC inputs
Mono Line inputs
Stereo Line inputs
All other inputs
All other outputs
Input Impedances
MIC
CD In
All other inputs
Output Impedances
Phones
All other outputs (balanced/unbalanced)
76
PowerMate 600-3
F01U213899
DC-PM600-3-UNIV
4 + 4
6
1 Pre, 1 Post, 1 Pre/Post switchable
2 x 1600 W
2 x 1250 W
2 x 675 W
2 x 1350 W
2 x 1150 W
2 x 650 W
2 x 1350 W
2 x 1000 W
2 x 600 W
2 x 900 W
2 x 450 W
74 V
rms
< 0.005%
< 0.075%
< 0.05%
< 0.15%
15 Hz to 70 kHz
20 Hz to 30 kHz
< -85 dB
< -80 dB
> 100 dB
> 85 dB
> 80 dB
-74 dBu (155 µV)
-54 dBu (1.55 mV)
-34 dBu (15.5 mV)
-34 dBu (15.5 mV)
+8 dBu (1.95 V)
+11 dBu
+31 dBu
+31 dBu
+22 dBu
+22 dBu
2 kOhms
10 kOhms
> 15 kOhms
47 Ohms
150 Ohms / 75 Ohms