Dynacord PowerMate3 Owner's Manual page 27

Turn the MENU/ENTER rotary encoder to highlight an en-
try in the left column of the FX Control Setup dialog.
Press the MENU/ENTER rotary encoder to select the cor-
responding value in the right column. Now turn the
MENU/ENTER rotary encoder to edit the value and press
the MENU/ENTER rotary encoder again to apply the new
value. Table 3-16 lists the entries of the FX Control Setup
dialog. Pressing the BACK function key returns to the
menu. Pressing the ESC function key returns to effect
mode.
D S
EVICE ETUP
This dialog can be used for editing system parameters
and checking system properties. Some menu entries (e.g.
Display Brightness) can be edited in the Device Settings
dialog after pressing the MENU/ENTER rotary encoder.
Other entries (e.g. Firmware Info) will open another dia-
log when pressing the MENU/ENTER rotary encoder.
Illustration 3-17: Device Setup dialog
Device Setup
Display Brightness
Screensaver
Personalize
Tooltips
Display Brightness
The currently set display brightness (from 0% to 100%) is
indicated in the right column. Press the MENU/ENTER ro-
tary encoder to edit the value. Turn the MENU/ENTER ro-
tary encoder to the left to decrease the display
brightness. Turn the MENU/ENTER rotary encoder to the
right to increase the display brightness. Press the MENU/
ENTER rotary encoder to apply the selected brightness.
Pressing the BACK function key returns to the menu.
Pressing the ESC function key returns to effect mode.
Screensaver
The currently set screensaver time interval is shown. Af-
ter the time interval (from 10 seconds to 60 minutes) has
expired the screensaver is activated. Press the MENU/EN-
TER rotary encoder to edit the value. Turn the MENU/EN-
TER rotary encoder to the left to shorten the time
interval, or deactivate the screensaver by selecting Off.
Turn the MENU/ENTER rotary encoder to the right to ex-
tend the time interval. Press the MENU/ENTER rotary en-
coder to apply the selected setting. Pressing the BACK
function key returns to the menu. Pressing the ESC func-
tion key returns to effect mode.
Personalize
Press the MENU/ENTER rotary encoder to open the Set
Device Name dialog. This dialog is used to change the
PowerMate's name, which can be composed of a maxi-
mum of 18 symbols and consist of all letters A-Z, a-z, the
numbers 0-9 and special characters.
100%
Off
ENTER
On
BACK ESC
Turn the MENU/ENTER rotary encoder to the left or right
to edit the highlighted character. Pressing the MENU/EN-
TER rotary encoder accepts the desired symbol and
moves the cursor to the next character. Move the cursor
to the left or to the right by pressing the

keys. Select the symbol or press the OK function key to
quit editing the name.
Pressing the BACK function key returns to the menu.
Pressing the ESC function returns to effect mode.
Tooltips
The indication of Tooltips, e.g. when opening the Speaker
Protection dialog, can be activated or deactivated. Press
the MENU/ENTER rotary encoder to edit the setting. Turn
the MENU/ENTER rotary encoder to select On if Tooltips
should be displayed. Select Off if Tooltips should not be
displayed. Press the MENU/ENTER rotary encoder to ap-
ply the selected setting. Pressing the BACK function key
returns to the menu. Pressing the ESC function key re-
turns to effect mode.
Play 11-12 at STDBY
Select „enable" if the DIGITAL AUDIO INTERFACE should
be used for playback of background music - e.g. using a
PC/Mac - in STANDBY mode.
HINT: If Play 11-12 at STDBY is enabled a confirmation
prompt appears in the display when activating
STANDBY mode. Press the MENU/ENTER rotary
encoder to confirm.
If „disable" is selected the signal received via the DIGITAL
AUDIO INTERFACE is muted in STANDBY mode. Pressing
the BACK function key returns to the menu. Pressing the
ESC function key returns to effect mode.
Factory Reset
The PowerMate can be reset to factory settings. Pressing
the MENU/ENTER rotary encoder opens a clear user FX di-
alog box that lets the user choose between YES or NO by
turning the MENU/ENTER rotary encoder. Select YES if all
user effects should be cleared. Select NO if the user ef-
fects should not be cleared. Pressing the MENU/ENTER
rotary encoder opens a safety dialog box „Are you sure?"
that lets the user choose between YES or NO by turning
the MENU/ENTER rotary encoder. If YES has been select-
ed, pressing the MENU/ENTER rotary encoder resets the
PowerMate to its factory settings. If NO has been select-
ed, all parameters stay unchanged and the display re-
turns to the menu. Pressing the BACK function key
returns to the menu. Pressing the ESC function key re-
turns to effect mode.
Table 3-18 lists all parameters that are affected by a re-
set.
Firmware Info
Press the MENU/ENTER rotary encoder to open the
Firmware Info dialog. This dialog shows the versions of
the firmwares that are actually installed in the PowerMa-
te. Pressing the BACK function key returns to the menu.
Pressing the ESC function key returns to effect mode.
3
P M
OWER ATE
 
or function
27