Ch4. How to Use Web Viewer
4.2.13. Upgrade
Upgrade program of SND-560 network camera.
■ System Upgrade Configuration.
Item
SND-560 Firmware
Upgrades the firmware of the SND-560 network camera.
■ Factory Mode Setup
If you click <Reset> button, server is returned to initial value when shipped from the factory
after confirmation procedure by administrator.
Notes
• If you perform the Factory Mode Reset function, the IP will be reset to 192.168.1.100, a value
set at the time of shipment from the factory. In this case, you may not log in depending on the
installation environment.
• When you reset a camera function related to video, you need to initialize the setting of the
OSD menu as well (see How to Operate Camera in Chapter 5).
58
NETWORK CAMERA
Description
User's Manual
4.2.14. System Reboot
Server is rebooted after confirmation procedure of administrator.
Click <OK> button to reboot server.
NETWORK CAMERA
59
User's Manual