Samsung SND-560 User Manual page 19

Ch4. How to Use Web Viewer
■ Continuous Jpeg Image Transmission
Item
RTSP/TCP Enable Determines whether to use RTSP/TCP.
RTP/UDP Enable Determines whether to use RTP/UDP.
RTP/
Determines whether to use RTP/Multicast.
Multicast Enable
Streaming Image The default setting of Multicast IP is 224.0.1.1.
Resolution Determines the resolution of the Streaming Engine.
• Unicast RTP streaming (RTP over UDP) is the adequate image transmission method to send
out the latest image despite of video loss.
• RTP over RTSP (RTP tunneled over RTSP) is useful to install a relatively simple firewall which
accepts RTSP data streaming.
Note
• Unicasting is adequate to VOD (Video On Demand) broadcasting, since it
sends out video data only with data transmission demand.
• Multicast RTP (RTP over UDP) sends out the latest video image to the users anytime despite
of video loss.
• It is more efficient to use broadband transmission to broadcast video image for multi users
simultaneously. Since multicast through internet is not available, you need a router to allow
multicast.
Note
• Up to 10 connections at the same time may be regarded as one connection.
36
NETWORK CAMERA
Description
User's Manual
■ DDNS Usage
Registration process of DDNS is as following
❍ ... Step1) Complete the registration form in iPOLiS website.
The website is 'www.samsungipolis.com'.
Figure 1. Website of iPOLiS
Figure 2. Membership Registration: SIGNUP
NETWORK CAMERA
37
User's Manual