Samsung SND-560 User Manual page 12

Ch3. Installation and Network Setup
4. Please configure according to the network environment where SND-560 network camera
will be installed and push <Save> button to save the configuration.
22
NETWORK CAMERA User's Manual
LAN / xDSL/ DHCP Configuration
①
Item
When network product is connected to normal local LAN or when
LAN Use connected to static IP, the network data to be allotted to the IP is
configured.
xDSL When using xDSL dynamic IP, enter the ID and PW.
When automatically receiving IP through DHCP server, the DHCP
functions are activated. 'DHCP' is used in the LAN environment where
DHCP the DHCP is activated. Generally, for mid/large scale, DHCP servers are
operated through LAN and for small-scales, IP sharers use DHCP
functions.
Port Configuration
②
Item
The connection port and http, ftp port configurations can be set here
Port Setting
and the DDNS use can be checked.
Note
• Use DDNS changes its IP address every time the user attempts to connect to the
ISP and when the product is connected to a cable modem or xDSL modem. In this
case, the user cannot know the changed IP address. When a product that uses
dynamic IP is registered on the DDNS server, when wishing to connect to the
product, the changed IP address can be easily recognized. Register the product in
the DDNS server in order to register the IP address in the DDNS server. Enable the
"Use DDNS" option and enter the submitted ID and password into the server.
NETWORK CAMERA
Description
Description
23
User's Manual