White Balalace (White Bal.); Backlight - Samsung SND-560 User Manual

Ch5. How to Operate Camera

5.2.3. WHITE BALALACE (WHITE BAL.)

Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal.' by using the Up and
Down buttons so that the arrow indicates 'White Bal.'.
2. Select a desired mode using the Up and Down buttons.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL

4.BACKLIGHT

* Select one of the following 5 modes, as appropriate for your purpose.
• ATW : Select this when the color temperature is between 1800°K and 10500°K.
• INDOOR : Select this when the color temperature is between 4500°K and 8500°K.
• OUTDOOR : Select this when the color temperature is between 1800°K and 10500°K.
(sodium light inclusion)
• AWC → SET : To find the optimal setting for the current luminance environment in
this mode, set the point the camera towards a sheet of white paper and
press the SET button. If the environment changes, readjust it.
• MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using
the ATW or AWC mode. After that switch to
MANUAL mode, fine-tune the White
Balance and then press the SET button.
Notes
White Balance may not work properly under the following conditions. In this case select the AWC mode.
• When the color temperature of environment surrounding the subject is out of the control range (e.g. clear sky,
or sunset)
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in a place where illumination changes
dramatically, the White Balance operation may become unstable.
64
NETWORK CAMERA
DC
ATW
OFF
User's Manual
5.2.4. BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at the same
time, even when the subject is in backlight, unlike conventional cameras, by adopting a
proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Up and
Down buttons so that the arrow indicates BACKLIGHT.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
2. Select a desired mode using the Left and Right buttons depending on the camera
purpose.
• BLC : Enables a user to directly select a desired area from a
picture, and to view the area more clearly.
- Select 'BLC' to adjust the area to be enhanced and
enhancement level.
• WDR : When there are both bright and dark areas at the
same time, this mode makes both areas distinctive.
WDR
- Select WDR to adjust the WDR LIMIT and LEVEL.
LIMIT : Adjust the WDR Sensitivity by selecting LOW,
MIDDLE, or HIGH.
LEVEL : Adjust the WDR Brightness by controlling the bar
from 0 to 100.
NETWORK CAMERA
DC
ATW
OFF
ON
OFF
65
User's Manual