Upgrade; System Reboot - Samsung iPolis SND-460V User Manual

Ch4. How to Use Web Viewer

4.2.13. Upgrade

Upgrade program of SND-460V network camera.
■ System Upgrade Configuration.
Item
SND-460V Firmware Upgrades the firmware of the SND-460V network camera.
■ Factory Mode Setup
Clicking the <Reset> button makes an administrator check the settings, then returns them to
their factory defaults.
Notes
• If you perform the Factory Mode Reset function, the IP will be reset to 192.168.1.100, a value
set at the time of shipment from the factory. In this case, you may not log in depending on the
installation environment.
• When you reset a camera function related to video, you need to initialize the setting of the
OSD menu as well (see How to Operate Camera in Chapter 5).
56
NETWORK CAMERA
search
Description
User's Manual

4.2.14. System Reboot

Server is rebooted after confirmation procedure of administrator.
Click <OK> button to reboot server.
Notes
• Pressing the <Reset> button next to the SD card for more than 3 seconds returns settings to
their factory defaults.
NETWORK CAMERA
57
User's Manual