Upgrade - Samsung SNC-570 User Manual

4.2.14. Upgrade

Upgrade program of SNC-570 network camera.
System Upgrade Configuration.
Item
SNC-570
Firmware
Factory Mode Setup
If you click <Reset> button, server is returned to initial value when
shipped from the factory after confirmation procedure by
administrator.
Caution
Upgrades the firmware of the SNC-570 network
camera.
If you perform the Factory Mode Reset function,
the IP will be reset to 192.168.1.100, a value set
at the time of shipment from the factory. In this
case, you may not log in depending on the
installation environment.
When you reset a camera function related to
video, you need to initialize the setting of the
OSD menu as well (see How to Operate Camera
in Chapter 5).
4.2. Using Administration page
Description
87