6-1-10 Performing Automatic Editing
Overview
Once you have set the necessary edit points, the
AUTO button lights up to show that the VTR is ready
for automatic editing.
Preroll point
Recorder VTR
Preroll
Playback mode
Player VTR
a) Preroll time: Factory-set to 5 seconds. Can be set from 0 to 30
seconds, in units of seconds, through the VTR SETUP menu.
b) The post-roll time can be set between 0 and 30 seconds in units
of seconds using the VTR SETUP menu.
c) Over-recording time: 2 seconds.
IN point
a)
Assemble editing
Insert editing
Playback mode
During automatic editing, the tape in the recorder VTR
and the player VTR move as shown in the diagram
below.
OUT point
Post-roll point
b)
Post-roll
Over-
c)
recording
Stop
Stop
6-11
Chapter 6 Editing