Connecting The Equipment - Cisco SPA232D Quick Start Manual

Connecting the Equipment

3
For wall-mounting instructions, see
N
OTE
Connect the provided Ethernet cable to the INTERNET (Blue) port.
S 1
TEP
Connect the other end of the cable directly to your broadband
network device.
Connect the provided phone cable to the PHONE 1 (Gray) port.
S 2
TEP
Connect the other end of the cable to your analog phone or fax
machine.
Optionally, connect an Ethernet network cable to the ETHERNET
S 3
TEP
(Yellow) port of the ATA. Connect the other end of the cable to a
device on your network, such as a computer.
Connect an analog phone line to the LINE (Green) port to connect
S 4
TEP
the ATA to your local telephone system.
Connect the provided power adapter to the POWER port. The unit
S 5
TEP
powers on.
Cisco SPA232D Quick Start Guide
Additional Information, page
WAN
8.
5