Mounting The Ata - Cisco SPA232D Quick Start Manual

Mounting the ATA

You can place the ATA on a desktop or mount it on a wall.
To prevent the ATA from overheating, do not operate it in an
C
AUTION
area that exceeds an ambient temperature of 104°F (40°C).
Desktop Placement
Place the ATA on a flat surface near an electrical outlet.
Do not place anything on top of the ATA; excessive weight
W
ARNING
could damage it.
Wall Mounting
The ATA has two wall-mount slots on the bottom panel. To mount the ATA
on a wall, you need mounting hardware (not included). Suggested
hardware is illustrated (not true to scale).
Recommended hardware (not included): Two number-six pan-head
tapping screws, 5/8-in. length, with anchors for sheet rock installation.
15,8 mm
Insecure mounting might damage the ATA or cause injury. Cisco
W
ARNING
is not responsible for damages incurred by insecure wall-
mounting.
12 Cisco SPA232D Quick Start Guide