Connecting The Equipment - Cisco SPA112 Quick Start Manual

Connecting the Equipment

3
For wall-mounting instructions, see
N
OTE
Connect one end of the provided Ethernet cable to the Internet
S 1
TEP
(Blue) port. Connect the other end directly to your broadband
network deviceConnect one end of a phone cable to the Phone 1
(Gray) port. Connect the other end to your analog phone or fax
machine.
Connect one end of another phone cable to another analog phone
S 2
TEP
or fax machine. Connect the other end to the Phone 2 (Gray) port.
SPA122 Only: Optionally, connect one end of an Ethernet network
S 3
TEP
cable to the ETHERNET (Yellow) port of the ATA. Connect the other
end to a device on your network, such as a computer.
Connect the provided power adapter to the Power port.
S 4
TEP
4
Mounting the ATA, page
Cisco SPA100 Series Analog Telephone Adapters
WAN
9.